Support Printers All-In-Ones L Series Epson EcoTank L365

What should I do if my printout is blurry or smeared?

  • If your printouts are blurry or smeared, try these solutions:

    • Make sure your paper is not damp, curled, old, or loaded incorrectly in your product.
    • Use a support sheet with special paper, or load special paper one sheet at a time.
    • Make sure your paper meets the specifications for your product.
    • Use Epson papers to ensure proper saturation and absorption of genuine Epson inks.
    • Make sure the paper type setting in your product software matches the type of paper you loaded.
    • Remove each sheet from the output tray as it is printed.
    • Avoid handling printouts on glossy paper right after printing to allow the ink to set.
    • Turn off any high speed settings in your product software.
    • If you print on both sides of a sheet of paper, smudges may appear on the reverse side of heavily saturated or dark images. If one side of a sheet will contain a lighter image or text, print that side first. Make sure the ink has dried before reloading the paper to print on the other side.
    • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary.
    • Align the print head.
    • Clean the paper path.

    Note: Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that extends beyond the base of the product in all directions.

Published:  Jan 7, 2016